توضیحات
ماژول بدون قاب GSM WITH 2 RELAY:
ولتاژ: 6 ولت -18 ولت ، هنگام استفاده از منبع تغذیه 6 ولت ، نیاز فعلی بالای 1.5 آمپر است
رابط رله: با استفاده از رله 250 ولت 10 آمپر ، می توانید بیشتر وسایل برقی موجود در بازار را مستقیماً کار کنید.
سوکت سیم کارت: در صورت خاموش بودن سیستم سیم کارت را وارد کنید. (لطفا در چین از کارت تلفن همراه یا Unicom استفاده کنید).
رابط LED: سه چراغ LED به نام D3 D5 D6 وجود دارد (D5 نزدیک به سوراخ موقعیت ، D6 نزدیک به رابط آنتن است). وضعیت نشانگر LED مربوط به شرایط کار تجهیزات به شرح زیر است ، هر ستون یک حالت است.
Mode configuration: Format: *code*$00000N $, N=1, 2, 3, 4. If you want to set this controller work at 1 mode, send the SMS: *123456*$000001$. The device will reply, content is: SYS Mode: 1 Set OK!
Note: 1 2 3 mode is phone mode, you can not use CHCH CMON CMOF command, you need set 4 mode, 4 mode is message mode, send the SMS: *123456*$000004$ to set the board on 4 mode, you can use below command
Command:
Relay On command: CMON, after successful setup, the device will reply SMS is: ON Set OK! For example, send the SMS: CMON. Relay status will be saved.
Relay Off command: CMOF, after successful setup, the device will reply, SMS Content is: OFF Set OK! Send the SMS: CMOF. Relay status will be saved.
Relay on for only 1-2 second command: CMDD, After successful setup, the device will reply, SMS Content is: Dian Dong Set OK! For example, send the SMS: CMDD. Relay status will not be saved.
Relay on for 1-99 minute command: CMSEONTIME(2 bit time), after successful setup, the device will reply, SMS Content is: ON Set OK! TIME ** MIN! The timing range is 1-99 minutes. If you want to control Relay On for 1 minute, send the SMS: CMSEONTIME01. Relay status will not be saved.
System status query instruction: CMCH. For example, sends the SMS: CMCH
Remote control: You can control your home devices even if you are in the office.
Application
Farmland irrigation
Greenhouse
Server room
Pet feeding
Oxygen pump
Roller shutter
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.