گیرنده دو کانال 220 ولت KR2202 315MHZ

۲۳۵,۰۰۰ تومان

165 در انبار

توضیحات

گیرنده دو کانال 220 ولت KR2202 315MHZ:

How to set the working mode of KR2202?
Note: The working mode can only be set when the two LED indicators of the KR2202 receiver are lit at the same time.
Set Momentary mode:
step 1)
Press and release the learning button on the KR2202 once.
Wait for a moment, one of the two LEDs on the KR2202 will turn off, indicating that you have entered the seting state.
Step 2)
Press and release the first button (such as the A button) on the QIACHIP remote control (transmitter). An LED indicator on the KR2202 will flash and then turn off, indicating the A button has been set.
Step 3)
Press and release the second button (such as button B) on the QIACHIP remote control (transmitter). The LED on the KR2202 flashes again and then turn on, indicating the B button has been set. The system is ready for use. Momentary mode is set successfully.

Set Toggle Mode:
step 1)
Press and release the learning button on the KR2202 twice.
Wait for a moment, one of the two LEDs on the KR2202 will turn off, indicating that you have entered the seting state.
Step 2)
Press and release the first button (such as the A button) on the QIACHIP remote control (transmitter). An LED indicator on the KR2202 will flash and then turn off, indicating the A button has been set.
Step 3)
Press and release the second button (such as button B) on the QIACHIP remote control (transmitter). The LED on the KR2202 flashes again and then turn on, indicating the B button has been set. The system is ready for use. Toggle Mode is set successfully.

Set Latching Mode:
step 1)
Press and release the learning button on the KR2202 3 times.
Wait for a moment, one of the two LEDs on the KR2202 will turn off, indicating that you have entered the seting state.
Step 2)
Press and release the first button (such as the A button) on the QIACHIP remote control (transmitter). An LED indicator on the KR2202 will flash and then turn off, indicating the A button has been set.
Step 3)
Press and release the second button (such as button B) on the QIACHIP remote control (transmitter). The LED on the KR2202 flashes again and then turn on, indicating the B button has been set. The system is ready for use. Latching Mode is set successfully.

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “گیرنده دو کانال 220 ولت KR2202 315MHZ”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “گیرنده دو کانال 220 ولت KR2202 315MHZ”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *