DC to DC step up 250W:
Module properties: non-insulated step-up module (BOOST)
65 * 56.5 * 23 (length * width * height) (mm)
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output current: 6A (MAX)
Input current: 10A (MAX) (please increase heat dissipation if more than 10A)
Output Power: 100W (MAX) Natural Cooling, 150W (MAX) Heat Dissipation Boost
Easy-to-use dual-core 65W 90W notebook.
Use a 12V notebook with a 19V 3.42A battery, module temperature around 45 ° C
Conversion efficiency: 94% (measured at 16V input, 19V 2.5A output)
Output ripple: 2% (MAX) of the 20m band
Working temperature: industrial (-40 ° C to + 85 ° C) (ambient temperature is more than 40 ° C, lower energy consumption or to enhance heat dissipation)
Full load temperature rise: 45 ° C
Idle current: 25mA typical
Voltage Regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (install fuses and protection circuits on the input port).
Input reverse polarity protection: none (please series diodes on the input port.)
1. Make the output regulated power supply of the vehicle, connect the 12V input, and the output can be 14-35V (adjustable freely), however, the output voltage can not be less than the input voltage.
2. Car laptop power supply: connected to 12V power supply, adjust the output voltage according to notebook needs.